• Welcome to BirdForum, the internet's largest birding community with thousands of members from all over the world. The forums are dedicated to wild birds, birding, binoculars and equipment and all that goes with it.

    Please register for an account to take part in the discussions in the forum, post your pictures in the gallery and more.
ZEISS DTI thermal imaging cameras. For more discoveries at night, and during the day.

Underway at last. (1 Viewer)

Well, I have at last started to do some photography again. As I write this, the camera is set up outside, focused on a perch near the feeders. I have two flash guns working as slave flash and I am operating the camera from inside the conservatory by remote shutter.
It is extremely windy and it keeps raining, but everything is inside plastic bags and a rain sleeve.
So far I have got just one phot - of a goldfinch. Trouble is, it is slightly out of focus. I am focussing manually on the branch but if the bird sits slightly further forward or back, the eye can sometimes be out of focus. If I use auto focussing, then the camera sometimes focuses on the background! I think I will have to stop down more to give a greater depth of field and still focus manually.
One other problem is the exposure mode. I usually set the camera manually to 250th of a second and f5.6 (or smaller in future) and rely on the flash for the correct exposure.The problem is that if the sun comes out, this could result in over exposure. So, on changeable days, I will set it on Tv mode, at 250th. If there is enough sunlight, then the camera will set the aperture with the flash providing fill in light. If there is not enough, then the flashes will provide the main light.
It has gone very dark again and looks like rain. I have taken the rain sleeve of the camera, so I will have to rush out again and put it back on!
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Users who are viewing this thread

Back
Top