forent
Well-known member
The perfect DIY digiscoping adapter ;-)
Please forgive the loudmouthed title but this little thing is my pride and joy today! :king:
I wanted to connect my Canon S95 compact camera with my beloved Nikon Fieldscope ED 82A. After twiddling a while with plumber pipes, rubber bands, bog rolls etc. (oh well…) I decided that I needed a real digiscoping adapter that should work as well as the original Nikon equipment (see http://www.nikon.com/products/sportoptics/lineup/dsystem/index.htm). Nikon offers some fine (and expensive) digiscoping adapters for its Coolpix cameras but IMHO no sensible solution for cameras of other brands. Canon itself does not supply anything at all for this task. “Universal” adapters of third-party makers are – again IMHO – usually cumbersome, shaky, inaccurate, and more often than not pretty pricey.
Luckily I have managed to make an adapter with simple handyman tools that provides nearly the same functionality than the original Nikon FSB’s, is sturdy, easy to use, compact and cheap. And, most importantly, it aligns the optical axis of the camera lens and the Fieldscope eyepiece accurately and maintains the optimal distance between them. To change the battery or the SD card I have to take the camera out but this is a matter of seconds. The adapter consists of a little rectangular box made exactly to the camera’s dimensions from 21mm film coated plywood, 6mm wallboard, and two pieces of a plastic profil rail. The wallboard holds a 1/4" screw for the tripod socket of the camera. In front of the plywood I bolted a 34mm (male) to 58mm (female) step-up ring (ordered from China via e*ay) that surrounds the camera lens very tightly and hence allows for its precise centering. At the upper frame of the plywood sits a little angle iron to hold the cable release (I drilled a 3,5mm hole with a 4x0.7mm thread for that). Left from the angle iron I filed the frame off to get easy access to the front control ring. All parts mentioned so far cost less than 15 Euros (including the cable release).
To connect the adapter to the fieldscope I had to buy the Nikon FSA adapter rings. If you own Nikon DS eyepieces the Nikon FSA-3 is sufficient: It screws to the 58mm thread of the step-up ring an matches the DS eyepieces directly. The FSA-3 is available in Germany for slightly more than 20 Euros. If you have Nikon MC eyepieces only (like me) you need in addition the rings FSA-1 & FSA-2 that surround the MC eyecup with a DS mount. I paid for the whole set FSA-1-3 less than 40 Euros last year.
The following pictures are self-explanatory. It should be easy to customize the construction for other cameras and scopes.
Now after completing the adapter I have to master the REALLY difficult task – become a better digiscoper.
Please forgive the loudmouthed title but this little thing is my pride and joy today! :king:
I wanted to connect my Canon S95 compact camera with my beloved Nikon Fieldscope ED 82A. After twiddling a while with plumber pipes, rubber bands, bog rolls etc. (oh well…) I decided that I needed a real digiscoping adapter that should work as well as the original Nikon equipment (see http://www.nikon.com/products/sportoptics/lineup/dsystem/index.htm). Nikon offers some fine (and expensive) digiscoping adapters for its Coolpix cameras but IMHO no sensible solution for cameras of other brands. Canon itself does not supply anything at all for this task. “Universal” adapters of third-party makers are – again IMHO – usually cumbersome, shaky, inaccurate, and more often than not pretty pricey.
Luckily I have managed to make an adapter with simple handyman tools that provides nearly the same functionality than the original Nikon FSB’s, is sturdy, easy to use, compact and cheap. And, most importantly, it aligns the optical axis of the camera lens and the Fieldscope eyepiece accurately and maintains the optimal distance between them. To change the battery or the SD card I have to take the camera out but this is a matter of seconds. The adapter consists of a little rectangular box made exactly to the camera’s dimensions from 21mm film coated plywood, 6mm wallboard, and two pieces of a plastic profil rail. The wallboard holds a 1/4" screw for the tripod socket of the camera. In front of the plywood I bolted a 34mm (male) to 58mm (female) step-up ring (ordered from China via e*ay) that surrounds the camera lens very tightly and hence allows for its precise centering. At the upper frame of the plywood sits a little angle iron to hold the cable release (I drilled a 3,5mm hole with a 4x0.7mm thread for that). Left from the angle iron I filed the frame off to get easy access to the front control ring. All parts mentioned so far cost less than 15 Euros (including the cable release).
To connect the adapter to the fieldscope I had to buy the Nikon FSA adapter rings. If you own Nikon DS eyepieces the Nikon FSA-3 is sufficient: It screws to the 58mm thread of the step-up ring an matches the DS eyepieces directly. The FSA-3 is available in Germany for slightly more than 20 Euros. If you have Nikon MC eyepieces only (like me) you need in addition the rings FSA-1 & FSA-2 that surround the MC eyecup with a DS mount. I paid for the whole set FSA-1-3 less than 40 Euros last year.
The following pictures are self-explanatory. It should be easy to customize the construction for other cameras and scopes.
Now after completing the adapter I have to master the REALLY difficult task – become a better digiscoper.
Last edited: