Join for FREE
It only takes a minute!
||Thread Tools||Rate Thread|
|Sunday 23rd March 2014, 12:54||#1|
Join Date: Jun 2008
Homemade mobiscoping adapter
At long last I found a plastic container the right size to fit over my Zeiss eyepiece.
I bought a £3.50 phone case off amazon, trimmed the container length and made a small hole in the centre of the base of the container.
To get the container to fit snuggly over the eyepiece, I glued a couple of small, thin butyl rubber pads (from leftover pond liner) inside the container.
I cut a circle of butyl rubber and super-glued it onto the base of the eyepiece and made a matching hole.
I trimmed the phone case slightly, so that the phone can be inserted/removed easily.
With the trimmed container in position on the eyepiece, I positioned the phone+case over the hole in the container, with the camera turned on to check alignment a few times before gluing it.
After a bit of practice lining things up, I put some cling film between the eyepiece and the container and another bit of cling film between the phone and the phone case in order to protect them whilst gluing.
Super glue was applied to the butyl rubber circle, and with the camera turned on, I carefully lined them up and stuck the case to the container, I had about 2 seconds to get the position right before the glue set!
Once I was happy that the case was secure, I took the adapter off the scope and removed the phone and the cling film. More super glue was then applied around the edges between the case and the container to try to make a secure joint.
When everything was well set, I assembled it all and had a go with it through the back door, it seems to work ok.
This morning I tried it out in "the field", well, on the moors anyway, appalling weather but I got some half decent vids of a mini-black grouse lek, which considering the distance, the weather and the fact I was holding the scope on the car window, I'm fairly happy with it.
Currently uploading the vid to my youtube channel. When its uploaded, you can see that I didn't get the alignment quite right as the vignette circle is slightly off centre, this means that I can't use the full zoom capability of the eyepiece.
All in all, reasonably promising, but I need to try it in better weather and hopefully on something a bit closer than distant black grice!
|Wednesday 2nd April 2014, 17:03||#2|
Join Date: Aug 2004
Location: newcastle upon tyne
Ideal, that's all you need rather than spend £70 on a flash adaptor.
Mines made from a old case, half an aerosol cap and gaffer tape!
Canon EOS 1DX mk2
BF Supporter 2005 Support BirdForum With A Donation
|Rate This Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Homemade Fat Balls||Stephen-Brooks||Food and Feeders||7||Sunday 15th January 2012 18:00|
|Homemade mobile phone adapter||Thoth||Mobile/iPhone Digiscoping||2||Monday 1st November 2010 19:34|
|Homemade adapter $5||lmans66||Digiscoping Adapters||3||Tuesday 15th December 2009 00:48|
|Homemade box||htcdude||Nestboxes||2||Thursday 11th June 2009 17:04|
|Homemade adaptor for F30||jourdaj||Digiscoping Adapters||1||Monday 15th January 2007 18:58|