BruceH
Avatar: Harris Hawk
Screw Driver Update
After my first pass of adjusting the hinge as documented above, I did search for a better screw driver and ended up ordering one off eBay.
Manufacturer: Wiha
Precision series
Blade Width: 1.5mm
Model: 26015 (for 260 series, size 1.5mm)
Number on Handle 260 (for 260 series)
Made in Germany
This one is much better than what I used before. There is still some play due to the screw slot being wider than the blade, but it is much better than before and should work
The eBay vendor I ordered from is KCToolco located in Kansas. I ordered in the evening and it was shipped the next morning via 1st Class USPS. Their price went up a little after I ordered.
Here is a list of sellers:
http://www.ebay.com/sch/i.html?_fro....H0.XWiha+26015.TRS0&_nkw=Wiha+26015&_sacat=0
(If clicking on the above link takes you to the Viglink page, scroll down and click on "Why am I seeing this" in small blue type. On the next page, click on "to opt out click here". Then click on the Disable Viglink orange button. Now come back to this post and click on the link again)
The next size up from Wiha is 1.8 mm but I suspect that would be to wide to fit the recessed hole.
Here is all you need and you should be good to go ........
After my first pass of adjusting the hinge as documented above, I did search for a better screw driver and ended up ordering one off eBay.
Manufacturer: Wiha
Precision series
Blade Width: 1.5mm
Model: 26015 (for 260 series, size 1.5mm)
Number on Handle 260 (for 260 series)
Made in Germany
This one is much better than what I used before. There is still some play due to the screw slot being wider than the blade, but it is much better than before and should work
The eBay vendor I ordered from is KCToolco located in Kansas. I ordered in the evening and it was shipped the next morning via 1st Class USPS. Their price went up a little after I ordered.
Here is a list of sellers:
http://www.ebay.com/sch/i.html?_fro....H0.XWiha+26015.TRS0&_nkw=Wiha+26015&_sacat=0
(If clicking on the above link takes you to the Viglink page, scroll down and click on "Why am I seeing this" in small blue type. On the next page, click on "to opt out click here". Then click on the Disable Viglink orange button. Now come back to this post and click on the link again)
The next size up from Wiha is 1.8 mm but I suspect that would be to wide to fit the recessed hole.
Here is all you need and you should be good to go ........