• Welcome to BirdForum, the internet's largest birding community with thousands of members from all over the world. The forums are dedicated to wild birds, birding, binoculars and equipment and all that goes with it.

    Please register for an account to take part in the discussions in the forum, post your pictures in the gallery and more.
ZEISS DTI thermal imaging cameras. For more discoveries at night, and during the day.

Broken binoculars (1 Viewer)

Philip4953

New member
Hello forum,
8x42 Adlerblick

Can anyone help, the adjustable viewing eyepiece has become detached from the main part of the binocular cannot establish how this is attaches. Any help or if a name of local repairer would be greatly appreciated
 
Hi Philip and a warm welcome to you from all the Staff and Moderators.

I've moved your post to the Binocular Forum and subscribed you to the thread so that you can find it easily.

I hope you enjoy your time here with us.
 
Hello forum,
8x42 Adlerblick

Can anyone help, the adjustable viewing eyepiece has become detached from the main part of the binocular cannot establish how this is attaches. Any help or if a name of local repairer would be greatly appreciated

Hi Phillip:

You don't need a repairman; you need a jeweler's flathead screwdriver.

Remove the soft rubber eyecup. Under it, you should see 3 setscrews equispaced around the diopter ring—a couple have come loose. Position them as far down on the EP as you can and tighten all three. You won't have "Zero Diopters" set, but most folks don't pay attention to that, anyway. :cat:

Cheers,

Bill
 
Last edited:
Bill, thank you for your response and advice

Thank me when you get it fixed; I have been away from the bench too long. They could have changed things in the meantime.

But the Adlerblick is basically the old Celestron Ultima series and the Swift Ultralite series ... with different cosmetics, of course.

Bill
 
Repaired thanks

:t::t::t::t:eek::):t:
Hi Phillip:

You don't need a repairman; you need a jeweler's flathead screwdriver.

Remove the soft rubber eyecup. Under it, you should see 3 setscrews equispaced around the diopter ring—a couple have come loose. Position them as far down on the EP as you can and tighten all three. You won't have "Zero Diopters" set, but most folks don't pay attention to that, anyway. :cat:

Cheers,

Bill
 
Bill:

Now all should see how your knowledge and help is a great thing.

Keep up the good work. ;)

Jerry


Don't I wish!? No, I will still be hated by some for not pussyfooting around and offering what I THINK as opposed to what I KNOW.

A dirty job? Yes. Necessary? Still yes.

I wish my shoulders were as broad as my belly!

Bill
 
Warning! This thread is more than 8 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Users who are viewing this thread

Back
Top