alan_rymer
Well-known member
I used to digiscope with a camera that has a lens housing was quite a lot smaller than the inside of my scope's eyepiece. What I did was, search around the kitchen to find a bottle cap with an inside diameter slightly larger than the camera's lens housing. Buy some self adhesive velcro ( only using the soft bit ) line the inside of the bottle cap, and if nessessary the outside of the cap so its a snug fit inside the scope eyepiece, Then drill a suitable sized hole in the bottom of the cap. Then use trial and error to work out how far the lens need to be away from the eyepiece and pack it out accordingly. Its quick to use and the camera is always centred and the right distance away. There are pictures on another thread somewhere on here from a long time ago!
Found it, on this one I used insulating tape around the outside!
http://www.birdforum.net/showthread.php?t=53692&highlight=bottle
Found it, on this one I used insulating tape around the outside!
http://www.birdforum.net/showthread.php?t=53692&highlight=bottle
Last edited: