I have purchased a new 10x32 HG from USA and I am living in HONG KONG. It is noted that there exists a slight vertical mis-collimation which can be viewed when looked say 4 inches from eye piece. Also the right image is very slightly rotated anti-clockwise.
I also have a nikon 16x50. There is no vertical mis-collimation, but right image also has very minor rotated situation.
Is this vertical and rotated mis-collimation correctable or such minor discrepancies is within the nikon limit.
Noted mis-collimation is not a rare situation even for top bins from other brands. However should collimation be an absolute no-error situation or minor error would be a factory acceptable situation. Should I go back to nikon and ask for re-collimation.
Thanks for your advice.
I also have a nikon 16x50. There is no vertical mis-collimation, but right image also has very minor rotated situation.
Is this vertical and rotated mis-collimation correctable or such minor discrepancies is within the nikon limit.
Noted mis-collimation is not a rare situation even for top bins from other brands. However should collimation be an absolute no-error situation or minor error would be a factory acceptable situation. Should I go back to nikon and ask for re-collimation.
Thanks for your advice.