• BirdForum is the net's largest birding community dedicated to wild birds and birding, and is absolutely FREE!

    Register for an account to take part in lively discussions in the forum, post your pictures in the gallery and more.

Nikon SE/EII Parts (1 Viewer)

Rodgerbiltit

Active member
Sharing what a lot of you may already have...

As a consequence of removing the Bushwacker Size 5 from the objectives of my 8X32 SE's the Objective Tube End Rubbers were stretched and required replacing.

http://www.birdforum.net/showthread.php?t=238464

I also replace the Rubber Eye Cups as I am bespectacled and have them constantly folded. I now finally (Nikon spare parts service is slow as all items appear to be backordered and freighted from Japan) have one pair of 8X32 SE's stored in mint condition!

Whilst in contact with the local Nikon spare parts representative I purchased replacement Rubber Eye Cups for my Hong Kong purchased 8X30 EII's...

Plastic Eyepiece Cap (for all EII's and SE's) - BXA30247
Rubber Eye Cup (All SE's) - BXA30248
Rubber Eye Cup (EII's) - BXA30360
Front Lens Cap (10X42 SE) - BXA30246
Front Lens Cap (8X32 SE) - BXA30329
Objective Tube End Rubber (8X32 SE) - 9K640-058

I've also attached a scanned pdf of 10X42 SE schematic....

Hopefully this is of assistance to the collective knowledge base.

Rodger
 

Attachments

  • Nikon_10X42SE_Parts.pdf
    844.4 KB · Views: 196

Byclops

Member
Sharing what a lot of you may already have...

As a consequence of removing the Bushwacker Size 5 from the objectives of my 8X32 SE's the Objective Tube End Rubbers were stretched and required replacing.

http://www.birdforum.net/showthread.php?t=238464

I also replace the Rubber Eye Cups as I am bespectacled and have them constantly folded. I now finally (Nikon spare parts service is slow as all items appear to be backordered and freighted from Japan) have one pair of 8X32 SE's stored in mint condition!

Whilst in contact with the local Nikon spare parts representative I purchased replacement Rubber Eye Cups for my Hong Kong purchased 8X30 EII's...

Plastic Eyepiece Cap (for all EII's and SE's) - BXA30247
Rubber Eye Cup (All SE's) - BXA30248
Rubber Eye Cup (EII's) - BXA30360
Front Lens Cap (10X42 SE) - BXA30246
Front Lens Cap (8X32 SE) - BXA30329
Objective Tube End Rubber (8X32 SE) - 9K640-058

I've also attached a scanned pdf of 10X42 SE schematic....

Hopefully this is of assistance to the collective knowledge base.

Rodger

Rodger,

This info is very helpful. Thanks.

Ed
 

Users who are viewing this thread

Top