BirdForum is the net's largest birding community dedicated to wild birds and birding, and is absolutely FREE!

Register for an account to take part in lively discussions in the forum, post your pictures in the gallery and more.

Reply to thread

Message: <blockquote data-quote="Binoseeker" data-source="post: 3136915" data-attributes="member: 109987">Interfaces...Well, as said earlier, I used the opticron UTA adapter ring no. 40948, with some self-adhesive thin flocking material mounted on the inside to reduce internal diameter so now it fits very well onto the eyepiece on the meopta S2 HD scope, and on my McKinley 8x42 binocular.I put on some tape on the eyepiece, just below the twist up eye cup, to increase diameter to give more support for the adapter ring all the way s t s. I took one of the adapter rings, that came with the iphone 4/4s digiscoping adapter, the ring for BD/SV/YF-binoculars, and removed the thick flocking material, and put on some self-adhesive thin flocking material instead, to increase inner diameter, so now it fits perfectly on the opticron UTA eye piece so now it is easier to digiscope through the booster with my iphone 4/4s.With flocking materiel I mean black velvet/velour like fabric. I bought this EAN 8427973067076, to try it out, mounted inside a home made longer sunshade extender for my scope. The self-adhesive fabric is made by Sadipal, no 06707, cost 90 SEK. , size 100x45cm.<a href="http://en.sadipal.com/upload/producte/self-adhesive-velvet.pdf" target="_blank">http://en.sadipal.com/upload/producte/self-adhesive-velvet.pdf</a>Anders</blockquote>