Looking for new Tripod Head (1 Viewer)

[Chris.S]

Hi

Recently got a new tripod (Manfrotto 055) and i got a 128rc head which turns out is not what i'm after.

Having searched for quite some time looking for a certain type of head, i can't seem to find many, if any. I'm after something "like" this .

The closest thing i've found is this.

Is it just me or are there not many similar tripod heads like that? Also budget wise i'd say maybe £100, i'd consider going a little higher, but not much.

Thanks
Chris.

 

[Jim M.]

Hi

Recently got a new tripod (Manfrotto 055) and i got a 128rc head which turns out is not what i'm after.

Having searched for quite some time looking for a certain type of head, i can't seem to find many, if any. I'm after something "like" this .

The closest thing i've found is this.

Is it just me or are there not many similar tripod heads like that? Also budget wise i'd say maybe £100, i'd consider going a little higher, but not much.

Thanks
Chris.

Not following you. Why don't you just order the type of head you are after--the Velbon PH 157--in the first link? It's what I use with my KOWA 883, and I recommend it.

 

[Chris.S]

I should have mentioned i already own it and it doesn't fit the tripod, which is why i was asking Just knowing what to look for would help, nothing seems to be similar to it.

Cheers
Chris.

 

[CalvinFold]

I'm a little unsure what your criteria are based on your photos, but since I invested in some upgraded tripod gear last year, I can say for portability and flexibility, I've enjoyed:

• Manfrotto MH293D3-Q2 290 Series 3-Way Photo Head with Compact Foldable Handles
• Vanguard Alta Pro 263AT Aluminum Alloy Tripod Legs with Multi-Angle Central Column System

 

[dwatsonbirder]

The velbon head will fit those legs with an adaptor - I believe I used a 3/8" to 1/4" inch screw adaptor.

 

[Chris.S]

The velbon head will fit those legs with an adaptor - I believe I used a 3/8" to 1/4" inch screw adaptor.

This kind of thing?

I might as well give that a go.

Cheers
Chris.

 

[dwatsonbirder]

Hi Chris, not quite, more like this. Should be able to pick one up on a well known auction site for a few pounds.

 

[johnf3f]

I may be wrong but, if memory serves, doesn't most of the Manfrotto range of tripods work with both 3/8 and 1/4 threaded heads? I used to have an 055 XB pro and I think it had this feature - my Manfrotto mono pod certainly does. Look at the thread that the head attaches to and it should have an outer sleeve (3/8 thread) that slides down revealing a 1/4 thread which may fit the Velbon head.

 

[safaridreaming]

Hi Chris,

I use a Sirui VA-5 video head. Its an ultra compact head (around 600g) that handled my Zeiss Diascope 85 and now my Swaro ATS 80 with no issues at all.

Both scopes are perfectly balanced on this head.

The quick release plate comes with both 1/4" and 3/8" attachment screws so you can use whatever option you have available on the foot of your spotting scope..

I used this head previously on the CF variant of the Manfrotto 055 tripod, but have since upgraded the tripod to an Induro CLT403. Are you can see the base plate on the tripod is a little larger than the base of the head.

cheers
Jeelan

 

[sless]

hi Calvin,
would you say the Manfrotto 293D3-Q2 3-Way Tripod Head is ok for an Opticron ES 80 GA ED scope
thanks

 

[Sc0tty]

hi Calvin,
would you say the Manfrotto 293D3-Q2 3-Way Tripod Head is ok for an Opticron ES 80 GA ED scope
thanks

That head looks better suited for photography. If you are looking for a head suitable for scope you should be looking at fluid video heads e.g. Manfrotto MVH500AH or 128RC

 

[sless]

thank you very much for that info,im just busy looking at them now

 

[CalvinFold]

hi Calvin,
would you say the Manfrotto 293D3-Q2 3-Way Tripod Head is ok for an Opticron ES 80 GA ED scope

I think it would be fine, but to each their own budget and needs. Richard's advice is valid if you have the budget and you find a head that suits you.

 

[sless]

I opted for this one , Kingjoy VT-3510 Professional Flat Base Fluid Video Head with Quick Release Plate
Thanks for your replies